Rice University

Classroom Technologies

WSC 146 Wiess College

  • Conference Room Main Entrance View
  • Conference Room Rear/Side View
  • Conference Room Instructor View
  • Conference Room Rear View-Screen Off
  • Conference Room Rear View-Screen On
Room Type
Classroom - SCALAR/Flexible
Seats
30 - Tables & Chairs
Lighting
Fluorescent
Windows
Windows with Blinds/Shades
Writing Surface
Chalkboard
4' x 8'
Projection Surface
Retractable (motorized)
5' x 4'
Computers
Instructor PC
Outlets
Power at seats? No
Video Conferencing
Available? No
Accessibility
Student Wheelchair Access? Yes
Instructor Wheelchair Access? No
Flooring
Carpet

Request this room Request Help

Technology Instructions

Podium 4 - Lite

The "Podium 4 - Lite" class of podium is controlled by a touch-panel remote which is located either on the lift section of the podium surface or on the wall adjacent the podium.  The system contains a PC computer only, blu-ray/dvd disc player, and laptop VGA, HDMI, and stereo audio connection inputs.

Classroom activation:

1 - Wake the touch-panel: 

With a firm touch to the “touch-panel” screen or a firm press to the top left round button will wake the panel from hibernation.  A “welcome image” will appear prompting you to perform another firm touch to the screen in order to continue.

2 - Activation of projector:

With the touch-panel activated, a message box will appear asking whether or not the projector will be used for the session.  Press "yes" if affirmative, press "no" if negative. 

Note:  If subsequent use of the projector is required, pressing the “mode select” hard button on the right side of the touch-panel will activate the previous touch-panel message box, at this time, "yes" can be selected to activate the projector.

3 - Source display:

If “yes” is selected to activate the projector, a guide dialog box will appear prompting the user to select their desired source.  Please make sure to select the source you wish to use at this time. 

Note:  The PC may be in hibernation mode; thus you will have to "wiggle" the mouse or press the "Esc" (escape) button on the keyboard to wake the computer.

4 - Screen control:

The screen will be lowered automatically when the projector activates, thus there is no need to lower the screen manually.  However, there is a screen switch on the wall nearest the podium if required. 

5 - Monitor:

The monitor should be left on at all times, however sleep mode does activate after no source is present for 15 minutes.  To wake the monitor, you must first activate the system at the “touch-panel”, wake the computer you plan to use by pressing the escape button or wiggling the mouse.  Once the computer is operational an image should be presented on the monitor.  It’s possible the monitor was powered off if no image is viewable on the monitor.  Please locate the monitor power button and press to activate the monitor (location of power button will vary depending on monitor model).   

6 - Audio:

There are three audio levels that must be taken into consideration when operating room audio.  The computer audio should be at max level.  The software audio should also be adjusted accordingly.  The room audio at the touch-panel can then be adjusted up or down to further calibrate the room audio, this can be done using the “up” and “down” hard buttons on the left side of the touch-panel.

Note:  If the Mac computer audio is "greyed out", this indicates that the audio can only be adjusted through the touch-panel.  This is a function of the mac computer when connected to a source via HDMI cable. 

7 - Microphones (if applicable):

Please see the corresponding microphone "tab" for room specific instructions.

Note:  Not all classrooms are equipped with microphones.

Issues, questions, or urgent assistance please contact OIT Operations desk at 713-348-4989.